Brushless Motor : Solid Performance especially in heavy duty applications by efficient brushless motor and XGT Battery
41 Electronic Clutch settings (21-stage setting in High Mode) : A wider range of torque can be covered than mechanical clutch
Easy jog dial adjustment with digital display
AFT (Active Feedback sensing Technology) : Turns the motor off if bit rotation is suddenly forced to stop.
25% increase in Driving capability : Able to drive 125 pcs of Ø8 x 400mm long construction screws into 400mm thick SPF compared to 18V driver drill which can only drive 100pcs of same screw into 400mm thick SPF.
35% increase in Drilling Capability : Able to drill 135 holes through 38mm thick SPF with Ø65mm (2-9/16") self-feeding bit compared to only 100 holes drilled by 18V predecessor.
Outstanding Drilling Speed : 0 - 2,600 rpm at High Speed Mode
Compact Overall Length for easy handling and control : Currently at 181mm while 18V predecessor at 182mm
WORK AMOUNT ON A FULL BATTERY CHARGE (2.5AH) :
Drove around 40pcs of Ø8 x 400mm long construction screws into 400mm thick SPF
Drilled around 90 holes through 38mm thick SPF with Ø65mm (2 - 9/16") Self-feeding Bit
Drilled around 480 holes through 38mm thick SPF with 7/8" Ship Auger Bit
Color: Blue
Weight(KG): 3.000
Capacity
Masonry : 20mm (13/16")
Steel : 20mm (13/16")
Wood (Auger-Bit) : 50mm (2")
Wood (Self-Feed Bit) : 76mm (3")
Wood (Hole Saw) : 152mm (6")
Chuck Capacity : 1.5 - 13mm (1/16" - 1/2")
Impacts per minute : High : 0 - 39,000 IPM Low : 0 - 9,750 IPM
No Load Speed : High : 0 - 2,600 rpm Low : 0 - 650 rpm
Max. Fastening Torque : Hard : 140Nm (1,240 in. lbs.) Soft : 68Nm (600 in. lbs)
sales@hardwarecity.com.sg
+65 6266 0802
