CORDLESS HAMMER DRIVER DRILL DHP487

• Capacity Steel : 13mm (1/2 “)
• Wood (Auger-Bit): 50 mm (2”)
• Masonry: 16 mm (5/8”)
• Siding Board: 170 mm (6-11/16”)
• Chuck capacity 1.5 – 13 mm (1/16 – 1/2”)
• Impacts Per Minute (IPM) Hi : 0 – 2,100 Lo : 0 – 550
• No Load Speed (RPM) Hi : 0 – 31,500 Lo : 0 – 8,250
• Max. fastening torque Hard / Soft : 130 / 65 N·m
• Dimensions (L x W x H) 178 x 81 x 265 mm
• Net weight 2.3 – 2.7 kg (5.1 – 6.0 lbs.)

CORDLESS IMPACT DRIVER DTD157

• Capacity Machine Screw: M4 – M8 (5/32″ – 5/16″)
• Standard Bolt: M5 – M14 (3/16 – 9/16″)
• High strength bolt : M5 – M12 (3/16″ – 1/2″)
• Coarse thread (in length): 22 – 90 mm (7/8” – 3-1/2”)
• Hex shank 6.35mm (1/4″)span>
• Impacts Per Minute (IPM) Hard/Soft: 0-3,900/0-1,600
• No load speed (rpm) Hard/Soft: 0-3,000/0-1,300
• Max. fastening torque 140 N.m
• Dimensions (L x W x H) 133 x 81 x 232 mm
• Net weight 1.2 – 1.5 kg (2.7 – 3.3 lbs.)